User`s guide

The Trooper™ Basic Installation and User’s Guide 10
1.2 Main Menu
Power up The Trooper™ DVR by pressing the Temporary Power Button on
the front of the DVR for 3 seconds. The DVR will take approximately 20
seconds to perform its self-test. Press the ‘MENU’ button on either the front
panel or the remote control to enter the programming mode. The opening
menu will be displayed:
Use the ‘UP’ and ‘DOWN’
buttons to move between the
three options. The selected
option will be highlighted.
1.3 Software Version
Displayed on the Main Menu is the software version in the DVR. When
contacting Seon Design™ about any service or operational issues, please
have the software version available for the Service Technician. In the above
example, the software version is 1.00.
2. Set Time / Date / Title
2.1 Set Time / Date
Press the ‘ENTER’ button to change the time and date features. The menu
below will be shown:
Use the ‘UP’ and ‘DOWN’
buttons to move between the
different fields. Use the ‘LEFT’
and ‘RIGHT’ buttons, or the
‘JOG’ wheel, to change a value.
The time is displayed in 12-hour
format only.
The date is displayed as MM/DD/YYYY, where MM is the 2-digit month, DD is
the 2-digit day of the month, and YYYY is the complete 4-digit year. The day
SEON DESIGN INC.
MAIN MENU
SET TIME / DATE / TITLES
RECORD MODE / SCHEDULE
SYSTEM / DEFAULTS
VER 1.00 (07/28/2004)
SET TIME / DATE / TITLE
TIME: 10:44:32 AM (DST)
DATE: 05/27/2004 THU
AUTO DAYLIGHT SAVINGS: ON
DISPLAY VOLTAGE : ON
MAIN TITLE:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
CAMERA 1: 1_ _ _ _ _ _ _
CAMERA 2: 2_ _ _ _ _ _ _
CAMERA 3: 3_ _ _ _ _ _ _
CAMERA 4: 4_ _ _ _ _ _ _