User`s guide

The Trooper™ Basic Installation and User’s Guide 9
Operation
1. DVR Programming
1.1 Front Panel Controls
The DVR uses on-screen programming to allow for easy setup of all the
functions and controls. If the DVR is recording or playing, press the ‘STOP’
button on the front of the DVR and then enter the menus by pressing the
‘MENU’ button. The ‘Up’ and ‘Down’ arrow buttons are used to move up and
down through the menus, while the ‘Left’ and ‘Right’ arrows are used to
change values of menu items. The center Jog Control of the ‘SHUTTLE/JOG’
wheel can also be used to change the values of menu items.
The ‘ENTER’ button is used to select a menu item. Once in the menus, the
‘MENU’ button functions as an ‘EXIT’ button.
MENU/EXIT Button
ENTER Button
LEFT Arrow Button
RIGHT Arrow Button
UP Arrow Button
DOWN Arrow Button
SHUTTLE Wheel JOG Wheel (Center)