User guide

DVR Firmware and Configuration Uploads
700-0098 R006 4–7
4.2.2. Uploading Configuration Files to DVR via vMax Web
To remotely install a configuration update, the configuration file (received from Seon
or created and saved from a DVR in your network) must be on a computer with
network access to the DVR and with Internet Explorer 8 or 9 (32 bit version only) to
access vMax Web.
To upload a configuration update on the TL via vMax Web:
1. On a computer, copy the DVR configuration file.
2. Power up the DVR using the vehicle ignition.
3. Open Internet Explorer and type the DVR IP address in the address bar.
The default IP address is http://169.254.1.1.
4. If necessary, agree to Windows Run Add-On requests.
5. At the login prompt, enter a user name and password.
User names and passwords are case sensitive.
• Default User name: Admin.
• Default Password: 11111111.
6. Click Login.
Figure 4-9 Internet Explorer DVR URL
Figure 4-10 vMax Web Login