User guide

vMax Web Operation
3–10 700-0098 R006
To Search Video from an Event Marker
1. Select Event in the Search By drop down menu.
The Event Type and Event Filter menus appear, as shown in Figure 3-7.
2. From the Event type menu, select an event type.
3. From the Event Filter menu, select a filter type.
4. Select a search range start and end date and time.
5. Click Search.
The progress bar appears while the events are located on the DVR.
Table 3-6 Event Search Fields
Event Types Filters
Alarms Alarms recorded that occurred within the selected time range are listed.
Options include:
• Alarm 1-4 — as set in DVR Configuration menus, depending on DVR
type
•ALL — All alarms
Signals Signals recorded that occurred within the selected time range are listed.
Options include:
• Signal 1-10 — as set in DVR Configuration menus, depending on
DVR type
• ALL — All signals
System Events Telemetry events recorded that occurred within the selected time range are
listed. Options include:
• GPS — position data
System events recorded that occurred within the selected time range are
listed. Options include:
• Ignition — when vehicle ignition is engaged, the event is recorded
• Recording — DVR is recording
• Timers — as configured, when vehicle actions exceed preset timer
ranges the event is recorded
• Video Loss — when any camera is not detected, the event is recorded
ALL — all recorded telemetry and system events that occurred within the
selected time range are listed