User guide

vMax Web Operation
3–2 700-0098 R006
3.2. Accessing vMax Web
When the TL DVR is connected to the network, users can remotely access the DVR
over an Ethernet connection or using Seon Smart reach wireless access to view,
playback, and archive video as well as configure the DVR.
Follow the setup instructions in the Trooper TL Series DVR Install and Setup Guide,
document number 700-0099
To access vMax Web
1. On a PC with an Ethernet connection to the DVR, right click the Internet Explorer
icon and select Run as Administrator.
Windows may prompt for confirmation.
2. In the browser tray, confirm that Protected Mode is Off, as shown.
3. In the browser’s URL field, enter the DVR IP address from the Network Settings
menu.
The default DVR IP address is http://169.254.1.1.
4. On the keyboard, press Enter.
NOTE: vMax Web is not compatible with 64-bit versions of Internet Explorer.
Internet Explorer should be set to default settings.
If firewall security, antivirus software, access restrictions, or custom IE
settings are applied, they may adversely affect vMax Web performance.
vMax Web is not compatible with browsers other than Internet Explorer.
CAUTION: System Access Restriction
It is assumed that archiving is performed by users with administration level
login permissions, and that the computer, network, and Internet Explorer
have been configured to enable archiving and downloading video files.
Figure 3-1 Internet Explorer Protected Mode: Off