User guide

DVR Operation
2–12 700-0098 R006
2.5. Using One-Touch Download
Use the One-Touch download for downloading specific recorded information to a USB
drive via the USB port. One-Touch download is available when the DVR is on and in
live, playback, or record mode.
Video is downloaded in the seon proprietary format and can be viewed with the vMax
View application. See the vMax View User Guide, 700-0137.
The default setting for One-Touch downloads is Alarms. See the One Touch Settings
menu in the TL DVR Installation and Configuration Guide, 700-0099, for details on
setting the menu to Clip to enable One-Touch Clip downloads.
To use the One-Touch download option:
1. If the DVR is powered off, press the STOP/TEMP PWR button for five seconds to
power up the DVR for five minutes, or turn on the ignition.
2. When the DVR is on, connect a portable video monitor to VIDEO OUT on the DVR
front panel.
3. Insert a USB memory device into the USB port on the DVR front panel.
4. Press the ONE TOUCH button to download information to the USB drive.
The on-screen display indicates download in progress. The screen shows the USB
device size and the data file size.
The information that is downloaded is pre-selected by the settings for one touch
download button behavior.
Recommendation: Retrieving longer durations of video may take a long time. For large volume video
transfers, retrieve the drive from the DVR and view the video playback via the
vMax View software.
Figure 2-14 Mouse and Monitor Connected to DVR
TL DVR
Portable
Video Monitor
USB Mouse
USB Input
ONE
TOUCH
Button
STOP/TEMP
PWR Button