User guide

DVR Operation
700-0098 R006 2–5
2. Use the trackball mouse (right-click) to access the DVR’s configuration,
playback, and archiving menu settings as required.
Table 2-1 On-Screen Display Information
Feature Description
Camera 1 to
Camera 4
Camera titles, maximum 8 characters each.
Main_Title Main title of the DVR, maximum 32 characters.
HD_Size Formatted size of the DVR drive, in gigabytes (GB).
HD_Used Percentage of recorded video on the DVR drive. At 100%, the message displayed
depends on the Repeat Record settings in the Recording Settings menu.
• When Repeat Record is set to On, the HD Used message reads “N/A Repeating”.
N/A means that information on how much of the drive space is used is not
available because the drive is full. Repeating means the DVR continues recording,
overwriting the oldest recorded data.
• When Repeat Record is set to Off, the HD Used message reads “100%”. The DVR
stops recording.
Camera Off Indicates how long the cameras will record after the DVR powers down. Configured
as Record Delay-Off time from 0 seconds to 30 minutes.
Version DVR firmware version. To update, see Firmware Updates, on page 4–2
.
Status DVR operation status:
• LIVE (live mode not recording)
• PLAYBACK (the DVR is playing locally, displays RECORD, ALARM, or TIMER)
• RECORD (normal recording)
• ALARM (alarm recording)
• V. LOSS (video loss or camera signal loss)
Speed Display Vehicle speed and units (MPH, KPH)
Voltage System voltage from 8 to 32 VDC.
Temperature DVR temperature in degrees Fahrenheit or Celsius.
GPS When GPS display is enabled in the menus and the receiver is installed, the vehicle’s
latitude and longitude is displayed.
Time and Date Current/recorded time and date.
AC (Alarm
count)
Count of alarm(s) triggered. Resets to 0 when the DVR is restarted.