User guide

DVR Configuration Menus
4–14 700-0099 R008
4.5.2. Timer Settings Menus
Use the Timer Settings menu to set the timer schedules to turn the recording on and off
Use the Timer Settings menu to set the timer schedules to turn the recording on and
off.
The timer function can only operate when the ignition is on. It cannot be set to record
when the vehicle is off.
(when the vehicle ignition is on). The DVR supports ten independent timers that can
be used to control when and how the DVR records.
CAUTION: Set Unused Cameras Off
When a DVR is installed with less than the full complement of cameras
connected, disable unused camera input settings to prevent the DVR from
generating Video Loss (VLoss) events for those camera inputs. In the DVR
Configuration menus, disable unused camera inputs as follows:
• Record Settings menu: Camera Speed OFF,
Camera Audio OFF (to save disk space)
• Alarms/Signals menu: Channel Speed OFF.
Figure 4-13 Timer Settings Menus
Table 11 Timer Settings (1 to 10)
Menu Item Description Value [Default]
Enable Timers Enables preset times for recording. [Off], On
Day Set the timer to record on a specific day, daily, every
weekday (WDY), or only on the weekend (WND).
DLY, [WLY], WND, SUN,
MON, TUE, WED, THU,
FRI, SAT
Start Set in 12-hour format.
Set in 24-hour format.
• [12:00 AM] to 11:59 PM
for 12 hr format,
• 00:00 to 23:59 for 24 hr
format
End Set in 12-hour format.
Set in 24-hour format.
• [12:00 AM] to 11:59 PM
for 12 hr format,
• 00:00 to 23:59 for 24 hr
format
Set Enables and disables the timer. [Off], On