User guide

DVR Configuration Menus
700-0099 R008 4–13
4.5.1. Camera Settings Menus
Use the Camera Settings menus to set the FPS, picture quality, recording resolution,
and audio recording for up to four cameras.
Analog
Record2
The DVR can record video in two streams, one at high
resolution for full detailed event information, and the other
(Analog Record2) at lower resolution for fast downloading or
real-time viewing over a low bandwidth network, such as a
cellular link.
In the event of an emergency, if the system is configured with
Smart-Reach Cellular hardware and cellular plan,
AnalogRecord2 allows quick access to video on-line to assess
the situation.
Use the Analog Record 2 settings menus to set lower frame per
second recording rates for the analog cameras selected in the
Camera menu.
Off, 1, 2, 3, 4, [5]
fps
Table 9 Record Configuration Items
Menu Item Description Value [Default]
Figure 4-12 Camera Settings Menu
Table 10 Camera Settings Configuration Items
Menu Item Description Value [Default]
Speed Set the recording frame rate. The TL4/2 has a maximum total
combined frame rate of 80 frames per second which can be
distributed between up to 4 cameras.
Off, 1, 5, 7.5, 10,
[15], 30 fps
Quality Set the picture quality option. Setting 1 is the lowest quality,
setting 4 is the highest quality. The higher the quality, the more
space is used on the hard drive. The DVR uses H.264 video
compression to extend the recording time on the hard drive.
See Estimated Recording Time tables in the TL DVR User
Guide, 700-0098.
1, 2, [3], 4
Resolution Set the recording resolution in pixels. The higher the recording
resolution, the shorter the recording time on the hard drive.
[720 × 480],
720 × 240,
360 × 240
Audio
Recording
Enables audio recording for the input channel.
Turn off audio for camera channels that are not used.
Off, [On]