User guide

DVR Configuration Menus
700-0099 R008 4–9
4.4.2. Signals Menu
Use the Signals menu to configure signals and the actions they generate. The TL
supports 10 independent signals. The first five are designated as follows: LT (left turn
signal), STP (stop), BRK (brake), WRN (warning lights), and RT (right turn signal).
The last five can be set for other functions. All of these signals can be used to indicate
the status of any indicator, maximum 3 characters.
Figure 4-8
Signals Menu
Table 6
Signals Configuration Items
Menu Item Description Value [Default]
Signal 1 On screen display text for left turn signal. LT, maximum 3 characters
Signal 2 On screen display text for stop signal. STP, maximum 3 characters
Signal 3 On screen display text for brake signal. BRK, maximum 3 characters
Signal 4 On screen display text for warning lights signal. WRN, maximum 3 characters
Signal 5 On screen display text for right turn signal. RT, maximum 3 characters
Level Indicates the activation level for the signal.
If Active High is selected, 12 VDC applied to a
signal causes the text to be displayed.
If Active Low is selected, 0 VDC applied to a
signal causes the text to be displayed.
[Active H], Active L
Alarm When the alarm setting is enabled, signals can
trigger an alarm. See Alarm Menu
, on page 4–7.
[Off], Alm 1, Alm 2, Alm 3,
Alm 4