User guide

Advanced Setup
700-0099 R008 3–5
11. Click Back in the Program Update and then System Settings menus to save and
exit the menus.
12. From the Configuration menu, click Title/Display, and in the Titles and Display
menu, update the text in the Main_Title field.
13. Click Back to save.
14. Remove the USB memory device.
15. If required, update the network settings.
16. Turn off the DVR, restart the DVR, and confirm that the new configuration
settings have been applied.
CAUTION: Risk of Network Settings Loss
Configurations uploaded to the DVR from USB do not get written
to the DVR until it powers down and restarts. If the DVR settings are
edited locally after this configuration is uploaded but before the DVR is
restarted, the settings uploaded from the USB device will be lost.
Figure 3-7 Click Back to Save Configuration
Figure 3-8 Titles and Display Menus