User guide

DVR Setup
700-0099 R008 2–11
17. In the Configuration menu, click Network to edit the DVR network settings.
18. In the Network Settings menu, click Advanced, then User Levels to assign users
access permissions.
CAUTION: Network and Advanced Settings
Network and Advanced network settings should only be configured by Seon
Engineering Services or the fleet system administrator.
Setting Type: Leave at default
Static IP setting.
Use the IP address shown to
communicate with the DVR over
the internet with vMax Web.
If the DVR is attached to a Wi-fi
bridge, change these settings to
those supplied by the system
administrator.
If the IP information is changed and
saved in a configuration file for
upload to other DVRs, their settings will have to be updated as well.
See
DVR Menu Access, on page 2–1 .
Figure 2-16 Network Settings Menu
Users logging on to the DVR locally
or remotely should have password
control to protect the DVR from
being accidentally reconfigured.
Leave the default Admin user and
add other users with access levels as
needed.
Enter user names, passwords, and
assign levels:
Admin level user has complete DVR control.
Configure level cannot edit user levels or IP settings.
Playback level can only view and archive recordings.
Click Back to save the menu settings.
Figure 2-17 User Levels Menu
CAUTION: DVR Password Security
The default password is 11111111. For security purposes, Seon recommends that the
user default login and system settings passwords should be changed. Seon is not
responsible if the password is lost or forgotten.