Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 9
Adjusting the Date and Time
Use these procedures to set the DVR Date and Time.
Tools/Equipment
Portable video monitor and connecting cable to
DVR RCA Video Out connector
USB trackball or mouse.
Procedure
There are two ways to set the DVR Date and Time –
Manually, through the Time/Date Menu (see item 5 below).
Through the GPS/Speed Menu, if GPS is installed, using UTC Time Reference (See item 6
below).