Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 8
7. Left click on the Expand Bar icon.
8. Left click on the Playback icon. This replays the just recorded video.
9. Left click the Exit icon to return to normal view.
10. Turn off the ignition and allow the DVR to shut down normally.
11. Disconnect the monitor, mouse and install the locking lid.
Test complete.