Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 26
9. In the Program Update menu, click Update and, in the confirmation popup, select Yes.
10. You will see a progress bar.
Once the DVR is updated, the DVR will reboot its self.
11. Always Reformat the hard drives after a firmware update.
Reformatting Hard Drives
1. Access the Configuration menu by right clicking the mouse anywhere on the screen.
2. Click Configuration.
1. In the Configuration menu, click System.