Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 13
3. Set GPS Display to On.
4. Set GPS Time setting to On.
5. Set the UTC Reference to match your time zone as follows –
Eastern Time -5 Central Time -6
Mountain Time -7 Pacific Time -8
(When your Auto Daylight Saving feature is configured in the Time/Date sub-menu, the
UTC reference will be adjusted accordingly).
When GPS Time is set to On, it will override manual settings configured through the Time and
Date menu.