Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 12
8. Click the Hour or Minute box to open the numeric keypad.
9. Click Back to clear the current entry.
10. Use the numbers to enter the desired hour or minute.
11. Click OK to save your entry.
12. Use the same procedure to set the Date.
Setting the Time and Date using GPS
When GPS is installed users can set the Time and Date through the GPS Menu using UTC Time
Reference.
1. From the Configuration main menu, left click on Alarm/Signal.
The alarms and Signals menu appears.
2. Click GPS