Troubleshooting guide
Table Of Contents
- Maintenance Overview
- DVR Status Check and Camera Alignment – 5 Minute Test
- Adjusting the Date and Time
- Setting the Time and Date Manually
- Setting the Time and Date using GPS
- Changing Fan Filters
- Checking the DVR condition & mounting
- Connecting a Laptop to DVR via Ethernet Cable
- Connecting the DVR to the Computer
- Updating the DVR Firmware
- Reformatting Hard Drives
- Removing the Hard Drive
- Replacing the Hard Drive
- Cleaning the Dome or Wedge Camera Window
- Cleaning the DVR front cover and cable cover
- Troubleshooting Overview
Seon Maintenance and Troubleshooting Guide R004 10
Setting the Time and Date Manually
Use the Time/Date Menu to set the Time Format, Date Format, and the Auto Daylight Savings
options. You may also use the Time/Date Menu to manually set the date and time.
1. Right click anywhere on the screen then click the Configuration button.
2. Click on the Time/Date icon.
The Time and Date screen appears.
3. Select the Time Format and the Date Format from the drop-down lists. If Daylight
Saving applies in your area, ensure that the Auto Daylight Saving field is set to On.