Specifications

Installation and Quick Configuration Guide
700-0077 R002 9
Cameras
• Check for tight mount.
• Check the internal harness connections.
• Check that the lid is properly seated on the gasket and secured tightly.
• Check camera (s) field of view.
DVR
• Check for tight mounting of hardware.
• Confirm that the cable grommet is properly installed.
• Check that all connections are tight.
System
• Install the fuses.
• Plug the video monitor into the DVR and power up the system.
• Confirm that all the cameras and audio sources are operating properly.
• Confirm that all the status indicators react properly:
LAN, HDD, PWR, TEMP, VOLTAGE.
• Switch to temporary power by pressing the front panel
STOP/TEMP POWER button with vehicle ignition turned OFF.
• Test audio/video record and test audio/video playback.
• Configure the menus via the remote control or trackball mouse, or Web-based configuration per the end-user specifications. See
Explorer MX4 Mobile DVR System User Guide (document part number 700-0075).
• Fasten and lock the front cover. Fasten the cable cover on the unit using the screws provided.
Accessories
• GPS Receiver Installation – for more information, see the product documentation.
• TR-INR Inertia Sensor – for more information, see the product documentation.
• LDC Monitor – for more information, see the product documentation.
• Smart-Reach Wireless Network – contact your sales representative at Seon Design for wireless network options.
• CAN Network – contact your sales representative at Seon Design to discuss the CAN interface.