Setup guide

Explorer MX-HD Install and Setup Guide
700-0159 R003 9
7 Secure the DVR to the mounting plate with the two screws.
8 Connect the necessary components.
Camera Installation
Install the cameras according to the product documentation that is included with the camera.
Feed the cables through the large cable grommets one at a time, or cut a space from the edge of the cable
cover to the grommet and slide the cables into the grommet.
The Seon CHW HD camera requires power over Ethernet and that power is supplied by the Seon POE
Injector or Switch. See the Seon POE Injector Installation Guide 700-0166 or the Seon POE Switch
Installation Guide 700-0193 for details on connecting the POE to the camera and DVR.
Figure 4 DVR Attaching to Mounting Plate
CAUTION: Wiring Damage
Route the wiring and cables away from sharp edges that might damage the insulation. Avoid
sharp bends in the cable.
CAUTION: POE Damage
The Seon POE Injector or Switch is designed for SEON Smart-Reach Lite and CHW Series
HD camera products only. Connecting other devices to the Seon POE Injector/Switch will
void the warranty and damage the POE Injector/Switch, the device, or both. The POE Injector/
Switch supports only 12VDC.
Seon is not responsible for any damage caused by product misuse.