Setup guide

Explorer MX-HD Install and Setup Guide
52 700-0159 R003
GPS Settings Menu
Use the GPS Settings menu to configure how GPS data is displayed.
Figure 69 GPS Settings Menu
Table 12 GPS Settings Menu Items
Menu Item Description Value [Default]
GPS Display Show or hide the GPS display. With a GPS module connected
to the DVR, the latitude and longitude of the vehicle location
are displayed.
[On], Off
GPS Time Show or hide the GPS time. [Off], On
UTC Reference UTC refers to the atomic clock standard in Greenwich,
England. The DVR location is a certain time difference from
UTC time. Determine your time difference from UTC time and
select this time.
• For example, Eastern Standard Time is –5 hours from UTC
time.
• Pacific Standard Time is –8 hours from UTC time.
–12 [–5] to –1, 0, +1 to +12
Fencing (Geo-fencing)
Alarm
Using GPS, geo-fencing lets the administrator set a designated
geographic radius. If the vehicle deviates from this area, the
DVR sounds an alarm.
Enable or disable the fencing alarm to record an alarm or not.
[Off], ALM 1, ALM 2, ALM
3, ALM 4
Coordinate Style: Circle Set the coordinate style to a circle. Enter information for LAT
and LONG, as displayed in Figure 69.
[Circle], Rectangle
Circle Center: LAT Set the latitude to 0° 00.00.00’ through 90° 00.00.00’. [0 0.0 0 N]
Circle Center: LONG Set the longitude 0° 00.00.00’ through 180° 00.00.00’. [0 0.0 0 E]
Distance If the coordinate style is circle, this option defines the radius. [1] to 999
Units Set the units in miles or kilometers. [Miles] KM
Coordinate Style: Rectangle Set the coordinate style to a rectangle. Enter information for
Top Left: LAT and LONG and Bottom Right: LAT and LONG
appear, as displayed in Figure 69.
Top Left: LAT * Set the latitude to 0° 00.0000’ through 90° 00.0000’. [0 0.0 0 N]
Top Left: LONG * Set the longitude to 0° 00.00.00’ through 180° 00.00.00’. [0 0.0 0 E]