Setup guide

Explorer MX-HD Install and Setup Guide

700-0159

R003

Monitor Settings Menu

Use the Monitor Settings menu to set monitor default and alarm trigger views.

Figure 62

Diagnostic Display Menu

Table 6

Diagnostic Display Configuration Items

Menu Item Description Value [Default]

Front Default Setting Set the view (after power up) for the monitor

connected to VIDEO OUT on the front panel.

[Quad], CH 1, CH 2,

CH 3, CH 4

Rear Default Setting Set the view for a monitor connected to VIDEO OUT on

the rear panel.

[Front], CH 1, CH 2,

CH 3, CH 4, Off

Display Switch Show or hide the time/date display. [On], Off

Switch To When Display Switch is set to On, set the rear

monitor view.

[Front], CH1, CH2, CH3, CH4, Sequence

Switch On When Display Switch is set to On, set the trigger that

will make the rear monitor switch to the view selected

in Switch To setting.

[Alarm], Signal, Timer

Alarm (Signal or Timer) When Display Switch is set to On, set which specific

trigger will make the rear monitor switch from the

default setting. For example, ALM1 will make the

rear monitor switch to the view selected in the Switch

To option for the duration of ALM1.

[ALM 1], ALM2, ALM 3, ALM4