Setup guide

Explorer MX-HD Install and Setup Guide
34 700-0159 R003
Uploading Configuration Files to DVR via vMax Web
To remotely install a configuration update, the configuration file (received from Seon or created and saved
from a DVR in your network) must be on a computer with network access to the DVR and with Internet
Explorer 8 or 9 (32 bit version only) to access vMax Web.
To upload a configuration update on the MX-HD via vMax Web:
1 On a computer, copy the DVR configuration file.
2 Power up the DVR using the vehicle ignition.
3 Open Internet Explorer, and in the address bar, type in the DVR IP address.
The default IP address is http://169.254.1.1.
4 If necessary, agree to Windows Run Add-On requests.
5 At the login prompt, enter a user name and password. User names and passwords are case sensitive.
6 Click OK.
vMax Web opens with the DVR cameras displaying in Live view.
Figure 43 vMax Web Login
CAUTION: DVR Password Security
The default password is 11111111. For security purposes, Seon recommends that the user default login
and system settings passwords should be changed. Seon is not responsible if the password is lost or for-
gotten.
Figure 44 vMax Web Live View