Setup guide

Explorer MX-HD Install and Setup Guide
26 700-0159 R003
vMax Web Laptop Configuration
The MX-HD DVR can be managed via the vMax Web internet portal. Microsoft
®
Internet Explorer
®
7.0
or higher 32 bit version is required. Make sure the DVR and other system components are already installed
and configured in order to access the DVR via vMax Web. Connect the laptop to the DVR using an RJ-45
Ethernet cable.
To configure your laptop:
Configure your laptop to obtain IP addresses automatically using DHCP (Dynamic Host Configuration
Protocol). If it is not configured to DHCP, or you need to verify the setting, then follow these steps to
configure your laptop.
25 Navigate to Windows Local Area Connection properties in Windows 7 or XP as follows:
Windows 7: click Start > Control Panel > Network and Internet > Network and Sharing > Local Area
Connection.
Windows XP: click Start > Control Panel > Network Connections > Local Area Connection.
The Local Area Connection Status window appears.
26 In the Local Area Connection Status window, click on Properties.
Figure 29 Local Area Connection Properties window