Setup guide

Explorer MX-HD Install and Setup Guide
700-0159 R003 25
24 In the System Settings menus click Program Update and in the Program Update menu, store the DVR
configuration as a file to upload to other DVRs.
Select USB Device as the file saving destination.
Plug a USB memory device into the front of the DVR.
Click Store to save the file on the USB memory device.
Load: For details on uploading configurations to the DVR,
see
DVR Configuration Uploads, on page 30 .
Update: Firmware updates can also be delivered by a USB
device. The DVR will reboot when done.
Format: Format the hard drive when the configuration is
complete and before final delivery of the installation to the
customer.
Click Back to save the menu settings.
Figure 28 Program Update Menu