Setup guide

Explorer MX-HD Install and Setup Guide
700-0159 R003 23
20 In the Alarms and Signals menu, click GPS.
GPS Display: If a GPS receiver is installed, select On to
display the coordinates on the play view overlay.
GPS Time: Select On to have the play view overlay time set
by the GPS.
UTC Reference: Set the time zone:
• -4 Atlantic
• -5 Eastern
•-6 Central
• -7 Mountain
•-8 Pacific
Fencing Alarm: If required, set to On to display the
Geo-Fencing options. Choose Circle or Rectangle
coordinate style. Enter latitude and longitude coordinates to
define the fence.
Click Back to save the menu settings.
Format the drive after GPS settings are complete.
Figure 24 GPS Settings Menu
CAUTION: Recording over Multiple GPS UTC Reference Settings
Whenever the GPS UTC reference setting is edited, format the DVR hard drive before the
DVR starts recording.
This is to prevent the DVR from accidentally recording over the same time period in different
time zones. That can happen if a DVR records for a while in the default Eastern UTC reference
setting but the DVR is installed in a Central or other western time zone.
After installing and configuring, if the bus is driven out of the garage and the GPS detects
satellites and resets the time, it can attempt to record the same existing time stamp and cause
errors on playback.