User guide

DVR Operation
2–14 700-0160 R003
2.6. Using One-Touch Download
Use the One-Touch download for downloading specific recorded information to a USB
drive via the USB port. One-Touch download is available when the DVR is on and in
live, playback, or record mode. Use the ONE TOUCH button on the DVR. Video is
downloaded in the Seon proprietary DVR hard drive format and can be viewed and
archived with the vMax View application. See the vMax View User Guide, 700-0137.
The default setting for One-Touch download is Alarms. See the One Touch Settings
menu in the MX-HD DVR Installation and Configuration Guide, 700-0159, for details
on setting the menu to Clip to enable One-Touch downloads.
To use the One-Touch download option:
1. If the DVR is powered off, press STOP/TEMP PWR for five seconds to power up
DVR.
2. When the DVR is on, connect a portable video monitor to VIDEO OUT on the DVR
front panel.
3. Insert a USB memory device into the USB port on the DVR front panel.
4. Press the ONE TOUCH button to download information to the USB drive.
The on-screen display indicates download in progress. The screen shows the USB
device size and the data file size.
The information that is downloaded is pre-selected by the settings for one touch
download button behaviour.
Recommendation: Retrieving several minutes or hours of video may take a long time. For large
volume video transfers, retrieve the hard drive from the DVR and view the video playback via the vMax
View software.
Figure 2-14 Mouse and Monitor Connected to DVR
Video
Portable
Monitor
M
X
-
H
D
O
N
L
Y
USB Mouse
USB Input
ONE
TOUCH
Button
STOP/TEMP
PWR Button