User guide

DVR Operation
700-0160 R003 2–5
2. Use the trackball mouse (right-click) to access the DVR’s configuration,
playback, and archiving menu settings as required.
3. Proceed to the Configuration or Operation and Playback chapters for details on
available setting options.
Table 2-1 On-Screen Display Information
Feature Description
Camera 1 to Camera 4 Camera titles, maximum 8 characters each.
Main_Title Main title of the DVR, maximum 32 characters.
HD Size Formatted size of the DVR hard drive, in gigabytes (GB).
HD Used Percentage of recorded video on the DVR hard drive. At 100%, the message displayed depends on the
Repeat Record settings in the Recording Settings menu.
• When Repeat Record is set to On, the HD Used message reads “N/A Repeating”. N/A means that
information on how much of the hard drive space is used is not available because the hard drive is
full. Repeating means the DVR continues recording, overwriting the oldest recorded data.
• When Repeat Record is set to Off, the HD Used message reads “100%”. The DVR stops
recording.
Version DVR firmware version. To update, see Firmware Updates, on page 4–2
.
Status DVR operation status:
• LIVE (live mode not recording)
• PLAYBACK (the DVR is playing locally, displays RECORD, ALARM, or TIMER)
• RECORD (normal recording)
• ALARM (alarm recording)
• TIMER (timer recording)
• V. LOSS (video loss or camera signal loss)
Speed Display Vehicle speed.
Voltage System voltage from 8 to 32 VDC.
Temperature DVR temperature in degrees Fahrenheit or Celsius.
GPS If the GPS receiver is installed, the vehicle’s latitude and longitude is displayed.
Time and Date Current/recorded time and date.
AC (Alarm count) Count of alarm(S) triggered. Resets to 0 when the DVR is restarted.
IG (Ignition) Appears when vehicle ignition is on.