User guide

Introduction
700-0160 R003 1–9
1.3.2. DVR Back Panel Features
The MX-HD DVR back panel is shown in Figure 1-4 and described in Table 1-9.
Figure 1-4 Explorer MX-HD Back Panel
5
3
6
9
2
7
4
8
1
Table 1-9 Back Panel Features
Item Feature Description
1 CONTROL Control connector (2-pin) controls the Smart-Reach® Mobile wireless bridge
equipment.
2 AUX
POWER
Auxiliary power connector (2-pin) turns off after Record Delay Off settings.
3 1, 2, 3, 4 Four camera input connectors (6-pin)
4 Fan Intake fan with filter and removable cover. See Maintenance and
Troubleshooting, on page 5–1.
5VIDEO
OUT
Configurable video output for viewing video.
6 ALARM Alarm input connector for the alarm button and cable (2-pin).
7 AUD IN1,
AUD IN2
Audio input connectors with power mapped to Audio Channels 1 and 2 (4-pin).
8 POWER Power input connector (4-pin) for connecting the power harness.
9 ETHERNET
(Gigabit)
Ethernet port with RJ-45 connector for connecting to HD Camera or LAN.
Ethernet is used to connect either to a POE Injector for a CHW HD Camera, PC,
or Smart-Reach wireless bridge and other equipment.