User guide

Introduction
1–4 700-0160 R003
1.2.1. System Components
The typical MX-HD system consists of the following components (see Product
Interface and Devices, on page 1–7):
• Explorer MX-HD DVR and hard drive
• Analog cameras and camera cables, one per camera
• HD camera and Power over Ethernet Injector
• Trackball mouse
• Alarm input switch and cable
• Power input harness with in-line fuses for constant and switched power lines
The MX-HD Plus system consists of the following additional components:
• Smart-Link™ module
• Cables and harnesses:
• ignition input harness
• power input harness with in-line fuses for constant and switched power lines
• alarms and signals harnesses
• speed harness
• Diagnostic Button (optional)
• RGY Illuminator (optional)
• GPS (Global Positioning System) receiver (optional)
• Smart-Reach Wi-fi (optional)
• XELR-8 G-Sensor (optional)
• Portable video monitor (optional)
See Recording Capacity for DVR Hard Drive Storage, on page 1–5
.