User guide
Operation
3–16 700-0075 R002
3.7. Using One-Touch Download
Use the One-Touch download for downloading specific recorded information to a USB
drive via the USB port. One-Touch download is available when the DVR is on and in
live, playback, or record mode. Use the ONE TOUCH button on the DVR or the COPY
button on the remote control. Files are downloaded in the DVR drive format and can be
viewed and edited with the vMax View application. See the vMax View User Guide,
700-0137.
The default setting for One-Touch download is Alarms. See “One-Touch Settings Menu”
on page 2–28.
To use the One-Touch download option:
1. If the DVR is powered off, press the STOP/TEMP PWR button for 5 seconds to
power up the DVR for five minutes.
2. When the DVR is on, connect an LCD monitor to VIDEO OUT on the DVR front
panel.
3. Insert a USB memory device into the USB port on the DVR front panel.
4. Press the ONE TOUCH button to download information to the USB drive.
The on-screen display indicates download in progress. The screen shows the USB
device size and the data file size.
Recommendation: Retrieving several minutes or hours of video may take a long time. For large
volume video transfers, retrieve the drive from the DVR and view the video playback via the vMax View
software.
Figure 3-14
LCD Monitor Connected to DVR
LCD Monitor
USB Input
ONE
TOUCH
Button
STOP/TEMP
PWR Button