User guide

Operation
700-0075 R002 3–13
4. In the Search By drop down menu, select Time or Event. Depending on which
option is selected, choose from the following:
a) Time - enter the start date and time of the required video. The selected video
loads. Click Play. Go to step 5.
OR
b) Event - select the required search parameters in the fields as shown in Figure 3-11.
Figure 3-11 Event Search Fields
Table 3-5 Event Search Fields
Menu Item Description Value [Default]
Select Choose Record, high resolution video is available for archiving. Record]
Search By Choose whether to search by the time the event occurred, or by the specific
event triggered recordings.
[Time], Event
Event Type Enabled when Event is selected in Search By. Select the type of event to search
for.
[Alarms], Signals, System
Events
Event Filter Enabled when Event is selected in Search By. Select the specific alarm to search
for.
[ALL], ALM 0, ALM 1,
ALM 2, ALM 3, ALM 4
Start Date Set the start date (month, day, and year) for the search. [Current]
Time Set the start time for the search. [1hour before current time]
End Date Enabled when Event is selected in Search By. Set the end date (month, day, and
year) for the search.
[Current]
Time Enabled when Event is selected in Search By. Set the end time for the search. [Current time]