User guide

Operation
3–4 700-0075 R002
3.4. vMax View and DVR Drive Interface
The TL drive interface is provided with vMax View software to accommodate the TL
drives. The drive interface uses two USB connectors to work with power from the PC.
To access video from the drive using vMax View:
1. Remove the drive from the DVR.
2. Connect to the USB ports on a PC or laptop with vMax View installed, as shown
in Figure 3-1.
3. Open the vMax View software to search, playback and archive DVR drive
contents.
vMax View sees the information read from the DVR drive.
See vMax View User Guide 700-0137 for detailed procedures.
Figure 3-1 MX4 Drive Interface with Hard Drive