User guide

Configuration
2–22 700-0075 R002
2.2.7.1. User Levels Menu
Subnet Mask Uses an IP address beginning with 255 and
composed of four octets separated by
decimals to determine which network you
belong to.
Current Subnet Mask
addess
Default Gateway Gateway address uniquely identifies a host
or computer on the LAN which assigns the
IP addresses to your network. Uses an IP
address composed of four octets separated
by decimals.
Current Gateway addess
DNS Server Uses an IP address composed of four octets
separated by decimals. See “DDNS
(Dynamic Domain Name Server) Settings”
on page 2–23.
Current DNS Server
addess
MAC (Media Access
Control) Address (fixed)
Your DVR’s unique hardware number.
00:11:14:06:d3:1b
Figure 2-23 User Levels Menu
Table 2-16 User Levels Configuration Items
Menu Item Description Value [Default]
User 1 (User 2 to 6)
Name Six user names can be programmed to have
remote access to the DVR.
[Admin] for User 1
[Blank] for User 2 to 6
(maximum 8 characters)
Password Set the password for each individual user. [11111111]
Maximum 8 characters
Level Each user is assigned a specific access level.
Three levels are supported.
• playback - allows the user to play recorded
video and view live video only.
• configure - allows the user playback rights
plus DVR configuration.
• administrator - allows user full rights to the
DVR setting.
[Administrator] for
User 1
[Playback] for User 2 to
6
Table 2-15 Network Settings Configuration Items
Menu Item Description Value [Default]