User guide

Configuration
700-0075 R002 2–17
2.2.6. Recording Settings Menu
Use the Recording Settings menu to set the resolution, camera speed in frames per
second (FPS), image quality, Record Delay-On and Record Delay-Off times, and
other recording options.
Figure 2-18 Recording Settings Menu
Table 2-11 Record Configuration Items
Menu Item Description Value [Default]
Repeat Record Enables recording over older video data once
the drive is full.
• When On, at 100%, the on screen display
HD Used message shows “N/A Repeating”.
The DVR continues recording overwriting
the first recorded data.
• When Off, at 100%, the on screen display
HD Used message shows “100%. The DVR
stops recording.
[On], [Off]
Record Delay-On Time Enables a time delay after switched power to
the DVR is turned on.
[Off], 30 sec, 1, 5, 10,
20, 30, 45, 60 min
Record Delay-Off Time Enables a time delay to continue recording after
the switched power to the DVR is turned off.
0, [15], 30 sec, 1, 5, 10,
20, 30, 45, 60 min
Power Delay-Off Time Enables a time delay after the record delay-off
time expires to keep the DVR on but not
recording. The control connector on the DVR
back panel remains active to allow peripherals
such as Smart-Reach to be powered up during
the power delay time.
0, [15], 30 sec, 1, 5, 10,
20, 30, 45, 60 min, 2, 4
hour
Alarm Partition Size Enables a portion of the drive to be reserved for
alarm data that needs to be protected and not
erased by the Repeat Record function.
[Off], 10, 20, 30, 40%
Overwrite Alarm
Partition
Enables recording over older protected alarms
once the alarm partition is full.
[Off], On