User guide

Configuration
700-0075 R002 2–15
2.2.5.5. GPS Settings Menu
Use the GPS Settings menu to configure how GPS data is displayed.
o
Figure 2-16 GPS Settings Menu
Table 2-10 GPS Settings Configuration Items
Menu Item Description Value [Default]
GPS Display Show or hide the GPS display. With a GPS
module connected to the DVR, the latitude and
longitude of the vehicle location are displayed.
[Off], On
GPS Time Show or hide the GPS time. [Off], On
UTC Reference UTC is reference to the atomic clock standard
in Greenwich, England. The DVR location is a
certain time difference from UTC time. For
example, Eastern Standard Time is -5 hours
from UTC time. Pacific Standard time is -8
hours from UTC time. Determine your time
difference from UTC time and select this time.
-12 [-8] to -1, 0, +1 to
+12
Fencing (Geo-fencing)
Alarm
Using GPS technology, geo-fencing lets the
Administrator set a designated geographic
radius. If the vehicle deviates from this area, the
DVR will provide an alarm.
Enable or disable the fencing alarm to record an
alarm or not.
[Off], ALM 1, ALM 2,
ALM 3, ALM 4
Coordinate Style Set to a circle or rectangle and dynamic
prompts for LAT and LONG appear.
[Circle], Rectangle
Circle Center: LAT Set the latitude. [0 0 0 0 N] S
Circle Center: LONG Set the longitude. [0 0 0 0 E] W
Distance If coordinate style is circle, this option defines
the radius.
1 to 999
units Set the units in miles or kilometers. [MPH] KM
Coordinate Style:
Rectangle
Set the coordinate style to a rectangle. Enter
information for Top Left: LAT and LONG and
Bottom Right: LAT and LONG appear, as
displayed in Figure 2-17.
Top Left: LAT * Set the latitude to 0° 00.0000’ through 90°
00.0000’.