User guide

Configuration
2–12 700-0075 R002
2.2.5.2. Signals 1 to 5 Menu
Use the Signals menu to configure signals and the output they generate. The MX4
supports five independent signals: LT (left turn signal), STP (stop), BRK (brake),
WRN (warning lights), and RT (right turn signal). These signals can be used to
indicate the status of an indicator, maximum 3 characters.
Figure 2-13 Signals 1 to 5 Menu
Table 2-7 Signals 1 to 5 Configuration Items
Menu Item Description Value [Default]
Signal 1 On screen display text for left turn signal. LT
(maximum 3 characters)
Signal 2 On screen display text for stop signal. STP
(maximum 3 characters
Signal 3 On screen display text for brake signal. BRK
(maximum 3 characters
Signal 4 On screen display text for warning lights signal. WRN
(maximum 3 characters
Signal 5 On screen display text for right turn signal. RT
(maximum 3 characters
Level Indicates the activation level for the signal.
• If ACTIVE HIGH is selected, 12 VDC applied
to a signal causes the text to be displayed.
• If ACTIVE LOW is selected, 0 VDC applied to a
signal causes the text to be displayed.
•
CAN gets a signal from CAN bus.
[Active H]
Active L
CAN
Alarm When the alarm setting is enabled, signals can
trigger an alarm. See “Alarm Settings Menu” on
page 2–10.
[Off], ALM 1, ALM 2, ALM
3, ALM 4