User guide

Configuration
2–8 700-0075 R002
2.2.4.1. Monitor Settings Menu
Figure 2-9 Monitor Settings Menu
Table 2-4 Monitor Settings Configuration Items
Menu Item Description Value [Default]
Front Default Setting Set the view (after power up) for the monitor
connected to VIDEO OUT on the front panel.
[Quad], CH 1, CH 2,
CH 3, CH 4
Rear Default Setting Set the view for a monitor connected to VIDEO
OUT on the rear panel.
[Front], CH 1, CH 2,
CH 3, CH 4, Off
Display Switch Enables the rear monitor menu items: Switch
To, Switch On, Alarm (Signal or Timer).
[Off], On
Switch To Set the rear monitor view when Display Switch
is set to On.
Front, CH1, CH2, CH3,
CH4, Sequence
Switch On Set the trigger that will make the rear monitor
switch to the view selected in Switch To setting.
Alarm, Signal, Timer
Alarm (Signal or Timer) Set which specific trigger will make the rear
monitor switch from default setting. For
example, ALM1 will make the rear monitor
switch to the view selected in Switch To option
for the duration of ALM1.