User guide

Configuration
700-0075 R002 2–3
2.2.1. Configuration Menu Diagram
The following diagram shows the MX4 configuration menus.
Figure 2-3 Configuration Main Menu for On Screen Display and vMax Web browser
Title/Display
Main Title
Main Title Display
Camera 1
Camera 2
Camera 3
Camera 4
Monitor Settings
Front Default Settings
Rear Default Settings
Display Switch
Switch To
Switch On
Alarm
Diagnostic Display
Voltage Display
Time/Date Display
HDD Size Display
% Full Display
Alarm Count Display
Internal Temperature Display
Hard Drive Temperature
Time/Date
Time Format
Time
Date Format
Date
Auto Daylight Savings
DST Settings
Start Date
From
To
End Date
From
To
Record
Repeat Record
Record Delay-On Time
Record Delay-Off Time
Power Delay-Off Time
Alarm Partition Size
Overwrite Alarm Protection
Camera
Channel/Speed/Quality/
Resolution
Audio Recording 1/2/3/4
Record 2
Channel/Speed/Quality/
Resolution
Timer (1 – 10)
Day/Start/End/Set
Alarm/Signal
Alarms
Alarm
Alarm Duration
Alarm Input
Pre-Alarm Record
Channel (1 – 4)
Speed
Quality
Resolution
Email
Wake
Speed
Label/Level/Alarm
Signals (1 – 10)
Speed Display
Speed Units
Speed Pulse Count
Calibrate
GPS
GPS Display
GPS Time
UTC Reference
Fencing Alarm
Coordinate Style
Top Left: LAT
: Long
Bottom Right: LAT
: Long
Network
Setting Type
IP Address
Subnet Mask
Default Gateway
DNS Server
MAC Address
User Levels (1- 6)
Name/Password/Level
DDNS Settings
DDNS Server
User Name
Password
Record ID
FQDN Host Name
System
Disk Full
HD Failure
Password Enable
Password
Audio Output Channel
Program Update
Load Configuration from USB
Store Default Configuration to
USB
Firmware Update
Format Hard Drive
Load
Store
Update
Format
Email
SMTP Server
SMTP Port
Password
User Name
Pasword
Sender Email
Receiver Email
Subject
One Touch
One-Touch Download
Download All Alarm Data
From: Date
: Time
To : Date
: Time
Explorer MX4 DVR Configuration Main Menu