User guide

Configuration
700-0075 R002 2–1
CHAPTER 2
Configuration
This chapter provides information and procedures for configuring the DVR. This
chapter contails the following sections:
“DVR Configuration Options” on page 2–1
“Configuration Main Menu” on page 2–2
- “Configuration Main Menu” on page 2–2
- “Configuration Menu Diagram” on page 2–3
- “Using the On-screen keyboards” on page 2–4
- “Time and Date Menu” on page 2–5
- “Titles and Display Menu” on page 2–7
- “Alarms and Signals Menu” on page 2–10
- “Recording Settings Menu” on page 2–17
- “Network Settings Menu” on page 2–21
- “System Settings Menu” on page 2–24
- “Updating the Firmware” on page 2–29
2.1. DVR Configuration Options
The Trooper TL can be configured using two methods:
• On Screen Display (OSD) Configuration and Playback
See “On-Screen Display Access” on page 1–10
•• vMax Web Configuration and Playback
See “vMax Web Access” on page 1–12.
The Configuration Main Menu shown in “Configuration Main Menu” on page 2–2
applies to the on screen display (OSD) configuration and to the vMax Web browser
configuration menus.