User guide

Introduction
1–12 700-0075 R002
1.5.2. vMax Web Access
Use a PC or laptop with an Ethernet or wireless connection for vMax Web browser
access to configure the DVR, or playback and archive video. Follow the setup
instructions in the Explorer™ MX4 Basic and Plus Mobile Digital Video Recording
(DVR) System Installation and Configuration Guide, 700-0077.
To use the vMax Web browser:
1. On a laptop with Internet Explorer
®
and web access, enter the DVR’s IP address
(default: http://169.254.1.1) in the URL field in Internet Explorer and press Enter.
2. In the web browser login screen, enter the default user name (Admin) and
password (11111111), as shown in Figure 1-9.
The vMax Web browser opens with the live tab selected.
3. Use the computer’s keyboard and mouse controls to access the DVR’s
configuration, playback, and archiving menu settings as required.
4. Proceed to the Configuration and Operation chapters for details on available
setting options.
Tip: The default network settings allow for connection to a laptop computer for configuration of the DVR
only. For remote network access, consult with your IT staff or Seon Design to configure the DVR to be on
the same subnet as the laptop.
Figure 1-9 vMax Web Login Screen
Figure 1-10 vMax Web Live Tab