User guide

Introduction
700-0075 R002 1–11
2. Use the trackball mouse (right-click) or remote control (press MENU) to access
the DVR’s configuration, playback, and archiving menu settings as required.
3. Proceed to the Configuration or Operation chapters for further details.
Table 1-8 On-Screen Display Information
Feature Description
Camera 1 to
Camera 4
Camera titles, maximum 8 characters each. To set the camera title, go to “Titles and
Display Menu” on page 2–7.
Main Title Main title of the DVR, maximum 32 characters. To set the main title, go to “Titles and
Display Menu” on page 2–7.
HD Size Formatted size of the DVR drive, in gigabytes (GB).
HD Used Percentage of recorded video on the DVR drive. At 100%, the message displayed
depends on the Repeat Record settings in the Recording Settings menu.
• When Repeat Record is set to On, the HD Used message reads “N/A Repeating”.
N/A means that information on how much of the drive space is used is not
available because the drive is full. Repeating means the DVR continues recording,
overwriting the oldest recorded data.
• When Repeat Record is set to Off, the HD Used message reads “100%”. The DVR
stops recording.
To change the settings, see “Recording Settings Menu” on page 2–17.
Version DVR firmware version. To update, go to “Updating the Firmware” on page 2–29.
Status DVR operation status:
• LIVE (live mode not recording)
• PLAYBACK (the DVR is playing locally, displays RECORD, ALARM, or TIMER)
• RECORD (normal recording)
• ALARM (alarm recording)
• V. LOSS (video loss or camera signal loss)
Speed Display Vehicle speed. To change the settings, see “Speed Settings Menu” on page 2–14.
Voltage System voltage from 8 to 32 VDC.
Temperature DVR temperature in degrees Fahrenheit or Celsius.
GPS If the GPS receiver is installed, the vehicle’s latitude and longitude is displayed.
Time and Date Current/recorded time and date.
AC (Alarm
count)
Count of alarm(s) triggered. Resets to 0 when the DVR is restarted.