User guide

Introduction
1–10 700-0075 R002
1.5.1. On-Screen Display Access
Use the On-Screen Display mode to locally access the DVR drive content.
To use the on-screen display (OSD) with trackball mouse or remote control:
1. Connect an LCD monitor to VIDEO OUT on the MX4 DVR front panel.
When the on-screen display starts up, the MX4 DVR splash screen appears briefly
before the DVR enters live view.
For OSD configuration with the DVR, the default password setting is Off. The
password setting can be changed in “System Settings Menu” on page 2–24.
During live viewing and recording, the information displayed on the screen can
include the items shown in Figure 1-8 and described in Table 1-8. The screen
items can be configured in the main menu.
Figure 1-7 LCD Monitor Connected to DVR
MX4 DVR
LCD Monitor
Figure 1-8 On-Screen Display during Live Viewing and Recording