User guide

Introduction
1–6 700-0075 R002
1.4.2. DVR Back Panel Features
The MX4 DVR back panel is shown in Figure 1-4 and briefly described in Table 1-5.
The Product name 2 DVR has two camera connectors.
For the back panel connections, see Figure 1-1 and Figure 1-2.
Figure 1-4 Explorer MX4 Back Panel
1
5
3
6
9
2
7
4
8
1
Table 1-5 Back Panel Features
Item Feature Description
1 CONTROL Control connector (2-pin) for controlling the Smart-Reach® Mobile wireless
bridge equipment. See “Recording Settings Menu” on page 2–17.
2 AUX
POWER
Auxiliary power connector (2-pin). Turns off after record delay settings. See
“Recording Settings Menu” on page 2–17.
3 1, 2, 3, 4 Four camera input connectors (6-pin)
4 Fan Intake fan with filter and removable cover. See “Maintenance and Return” on
page 4–1.
5VIDEO
OUT
Configurable video output for viewing video.
6 ALARM Alarm input connector for the alarm button and cable (2-pin).
7 AUD IN1,
AUD IN2
Audio input connectors with power mapped to Audio Channels 1 and 2 (4-pin).
8 POWER Power input connector (4-pin) for connecting the power harness.
9 ETHERNET
(Gigabit)
Ethernet port with RJ-45 connector for connecting to LAN. Ethernet is used to
connect either to a PC or directly to the Smart-Reach wireless bridge and other
equipment.