User`s guide

Configuring the DVR
700-0058 R001 3–25
Table 3-15 System configuration items
Menu Item Description Values Default
ONE-TOUCH DOWNLOAD Use the ONE-TOUCH button without
a video monitor. See “4.5.2. U
SING
THE ONE-TOUCH DOWNLOAD
OPTION” ON PAGE 4–7.
•
ALARMS downloads alarm
events only, starting with the
latest segment and working
backwards.
•
TODAY downloads as much
information from today as
possible, starting with the latest
segment and working
backwards.
•
TIME downloads as much
information as possible onto the
external device, starting with the
latest segment and working
backwards.
ALARMS
ALARM
BUZZER Set to ON, the buzzer sounds when an
external alarm is received.
ON, OFF OFF
VIDEO
LOSS BUZZER Set to ON, the buzzer sounds for 30
seconds if a camera signal goes away
while the DVR is operating.
ON, OFF OFF
DISK
FULL BUZZER Set to ON, the buzzer sounds if the
REPEAT RECORD option is set to OFF
and the hard drive is full.
ON, OFF OFF
WATERMARK
VIDEO Set to ON, an undetectable code is
embedded into the video that can
only be seen using a special viewing
application.
ON, OFF OFF
PASSWORD
ENABLE Set to ON, the front keypad is locked
out and requires a password. Enter
the password while pressing the
FULL button. To use this function,
see “4.5.6. Using the LOCK Button”
on page 4–12.
ON, OFF OFF
SET
PASSWORD The password is 8 characters. Uses the numbers 0 1 2 3 4 5 6 7 8. 88888888
LOAD DEFAULTS Three sets of default settings are
available that can be changed by the
user.
MEM1, MEM2, MEM3, SEON (factory
default)
Not
applicable
SET DEFAULTS Three sets of default settings can be
changed and saved in the Set
Defaults menu. This means you can
call up different programming
features based on the use of the
vehicle.
MEM1, MEM2, MEM3 Not
applicable