User`s guide

Configuring the DVR
3–16 700-0058 R001
To change a setting on the sub-menu:
1. Turn the
JOG wheel clockwise or counter clockwise to change the value.
2. Press the
LOCK > button to advance through the fields.
3. Press the
DISPLAY < button to move back through the fields.
The selected menu item is highlighted with a pale blue background.
4. Press the
CLEAR button to reload the default value into a field.
5. To exit the menu, press the
MENU button.
6. Repeat these steps to set the Enable timers, Day, Start, End, and Set. See Table
3-11.
Figure 3-8 Timers menu
Table 3-11 Timers configuration items
Menu Item Description Values Default
ENABLE TIMERS Records at preset times during the day. The vehicle
ignition must be turned on for the timers to work.
Note: If the Timers are enabled and all the
individual timers are set to
OFF, the DVR will not
start recording. Either turn on an individual timer or
set Enable Timers to
OFF.
Record Delay-On settings are overridden by the
timers, except for the first 30 seconds. If the system
is recording during a Timer interval, then Record
Delay-Off settings overrides the timer once the
vehicle ignition is turned off.
ON, OFF (When turned on, the
DVR will not record unless a
timer has been turned on.)
OFF