User`s guide

Installation

2–6 700-0058 R001

2.4. Step 3: Installing the Cameras

If you have purchased cameras from Seon Design, install the cameras according

to the documentation that shipped with the product.

If you have cameras already installed, see “2.4.1. Checking the Camera Cable

Connections”.

2.4.1. Checking the Camera Cable Connections

The EX4 Plus 35 System uses an integrated mini-DIN connector for all of the

camera signals. The cable comes prewired into the camera, but if the cable

becomes disconnected, reattach into the terminal blocks inside the camera. See

Figure 2-4. The cable colors for correct wiring to the terminals are described in

Table 2-1. For complete camera information, see the product insert for the camera

(for example, SA Series Wedge Camera Setup Guide document part number 700-

0004).

Figure 2-4

Terminal blocks in the camera

Table 2-1

Camera cable wiring

Item Color Description

1 Red Power positive (+)

2 Black (and silver) Power ground (–)

3 Green Audio positive (+)

4 White Audio ground (–)

5 Yellow or orange Video positive (+)

6 Blue or brown Video ground (–)