User`s guide

Installation
700-0058 R001 2–5
2.3. Step 2: Installing the DVR in the Lock Box
The DVR has two brackets attached to the sides that allow it to slide easily in and
out of the lock box. The brackets also enable easy top-up orientation of the DVR
when the unit is installed on the floor or under a seat.
The rear of each bracket has two plastic retainers that allow cables to easily slip in
between to ensure they do not get pinched at the back of the lock box when the
DVR slides in. See Figure 2-3.
Figure 2-2 Lock box vertical installation
Vertical mounting
screw
Figure 2-3 Brackets and cable retainers
Brackets
Cable retainers