User manual

700-0055 R001 iii
Who This Guide is For
This Installation and Configuration Guide provides explanations and procedures
for installing, configuring, maintaining, and troubleshooting the Smart-Reach
Wireless Link.
The Guide is intended for users who are installing or configuring the Smart-Reach
Wireless Link. Installers should be qualified electricians with data communication
experience. Contact Seon Design for assistance with identifying qualified
contractors in your area.
A qualified IT administrator will be required to provide information and/or set up
the configuration parameters in Chapter 3, “Network Configuration”.
Conventions Used
Symbols Used
The following symbols are used in this guide or on a product label.
WARNING
Warnings identify conditions or practices that could result in personal injury or loss of life.
CAUTION
Cautions identify conditions or practices that could result in damage to the unit or other
equipment.
Important: These notes describe things which are important for you to know, but are
not as serious as a Caution.
Symbol Explanation
&
Warning or Caution

Earth (ground) terminal