User manual

Network Configuration
3–8 700-0055 R001
3.3. Using the Smart-Reach Network Software
Use the Smart-Reach software to configure the unit for the different operating
modes as a vehicle station or as a base station.
The network menu appears as shown in Figure 3-9.
To log on to Seon Smart-Reach:
1. Enter the login username: admin (default).
2. Press Enter.
3. Enter the password: admin (default).
4. Press Enter.
The Smart-Reach main menu appears as shown in Figure 3-10.
Figure 3-9 Welcome to Smart Reach window